Thanks to its washer shape and miniaturized dimensions, the NRG sensor can be installed in a few seconds, on all motorcycles,
without any mechanical modification to the original organs.
IT'S SUPPLIED WITH UNIVERSAL LOOM AND CAN ALSO BE COMBINED WITH
ONE OF THE OPTIONAL PLUG&PLAY CONNECTION KITS AVAILABLE FOR THE MOST COMMON BIKE MODELS
ADVISED IN THE AUTOMATIC CONFIGURATOR IN THIS PAGE.
Approved by IRTA for MOTO2 World Championship use.
The miniaturised NRG sensor is intended to detect not only the simple shift, but a signal proportional to the intensity of the driver’s action on the lever and pattern rod. This solution can provide for an extremely valid and accurate system without fastening to the engine or the chassis any counterpiece or spring adding troublesome clearances to the leverage.
This means that it is not sensitive to the lever vibrations and oscillations due to the asphalt roughness as well as to the lever shift due to the involuntary action of the driver’s foot.
This result can not be achieved by the common systems on the market, which detect the simple lever shift by means of linear sensors or complete with a microswitch because characterised by a very low accuracy level.
Our website uses first-party, session based and persistent cookies to allow a safe and efficient browsing and use of the site. These cookies are used to store the choices you make (language preference, country or other online settings) and to provide customized or optimized features you selected.
Processing concerns your personal data such as connection IP addresses, the date and time of connection and other data which you will freely provide.
Data is collected directly from the data subject.
The data controller is STARLANE S.r.l., Albano S.Alessandro (Bg), Via Madonna delle Rose, 70, VAT number IT02637310166, contactable by email to sales@starlane.com
The processing of personal data with your consent as legal basis is carried out for the following purposes:
The data controller may be contacted via email at sales@starlane.com
Your data may be communicated to partners, consultancy companies and private companies for the carrying out of the service or to public authorities according to legal requirements.
Your data will not in any manner be subject to distribution.
The transfer of data to other countries is not provided for, except for the backup of data which are transferred to the U.S.A. in compliance with the Privacy Shield.
The data collected will be stored for a period of time which is no longer than the fulfilment of the purposes for which they are being processed ("principle of storage limitation", article 5, GDPR) or according to the periods established by law.
The verification of the obsolescence of the data stored according to the purposes for which they have been collected is carried out periodically.
The data subject has the right to ask the data controller for access to their data, the correction or the cancellation of the same, the limiting of processing or the possibility to oppose processing, to request the portability of the data, to revoke consent for processing, exercising these and other rights provided for by the GDPR via simple communication to the data controller.
The data subject has the right to file a complaint with a supervisory authority.
The granting of consent for the processing of your data is obligatory for the activation of chat.
The personal data provided by yourself will be the subject of processing in compliance with the aforementioned regulation and the obligations of confidentiality followed by the data controller.
The data will be processed both via electronic and printed means, as well as with the use of any other appropriate means, in respect for suitable technical and organisational security measures provided for by the GDPR.