ALL ACCESSORIES AND SPARE PARTS  Stealth GPS-4 Lite

THERMOCOUPLE - FOR OIL - TYPE K THREAD M5 | Code: STKM5E
Oil temperature sensor


RID MOTO | Code: RID1M
CAN BUS module with inputs for: RPM, WHEEL SPEED, GEAR + 3 analog channels + Triaxial Accelerometer.
RID LAMBDA | Code: RID1LRT
CAN BUS module with Lambda Sond Bosch LSU4.9 and inputs for RPM and TPS.
RID ANALOG-3 | Code: RID1A3
CAN BUS module with N° 3 generic analog inputs + Triaxial Accelerometer.
RID KART | Code: RID1K
CAN BUS module with inputs for: RPM, WATER TEMP., WHEEL SPEED, GEAR, THERMOCOUPLE type K + Acceler.
PROFESSIONAL LINEAR SENSOR POT. 150 MM. CONN. M8 | Code: SSLIN150PROM8
Slim stem Linear potentiometric sensor 150mm with M8 plug.
PROFESSIONAL LINEAR SENSOR POT. 75 MM. CONN. M8 | Code: SSLIN075PROM8
Slim stem linear potentiometric sensor 75mm stroke M8 plug.
LINEAR SENSOR POT. 75 MM. CONN. M8 | Code: SSLIN075M8
Linear potentiometric sensor 75mm. Stroke-Rear Suspension M8.
LINEAR SENSOR POT. 150 MM. CONN. M8 | Code: SSLIN150M8
Linear potentiometric sensor 150mm. Stroke-Front Suspension M8.
60BAR BRAKE PRESSURE SENSOR CONN. M8 | Code: SSPBK60M8
Brake pressure 60 BAR sensor M10X1 thread conn. M8.
MALE-FEMALE 50CM PATCH CONN. M8 | Code: PR50M8
Male-Female 50cm sensor patch cable.
MALE-FEMALE 100CM PATCH CONN. M8 | Code: PR100M8
Male-Female 100cm sensor patch cable.
MALE-FEMALE 150CM PATCH CONN. M8 | Code: PR150M8
Male-Female 150cm sensor patch cable.
WATER TEMPERATURE SENSOR M10X1 | Code: CH2OM10
Water temperature sensor M10X1 to be mounted on the optional water manifolds.
WATER MANIFOLD 26MM. DIAM. FOR SENSOR M10X1 | Code: MAN26
Water manifold 26mm. diam. to be used with water sensor code CH2OM10.
WATER MANIFOLD 19MM. DIAM. FOR SENSOR M10X1 | Code: MAN19
Water manifold 19mm. diam. to be used with water sensor code CH2OM10.
WATER MANIFOLD 10MM. DIAM. FOR SENSOR M10X1 | Code: MAN10
Water manifold 10mm. diam. to be used with water sensor code CH2OM10.
BATTERY CASE FOR DOUBLE 9VOLT BATTERY | Code: BPP3C3
External battery case for double 9VOLT commercial batteries type PP3 for Stealth GPS-3/4 and Athon XS.
7,4V 2,2AH LI-ION BATTERY | Code: BLI07422
7,4V 2,2Ah Lithium-Ion Battery to be charged only by the specific charger code: BCLIMV.
Compact solution to supply Corsaro through the specific optional cable code PSCOR15M8.
BATTERY CHARGER FOR LI-ION MULTIVOLTAGE | Code: BCLIMV
Battery charger for Li-Ion BLI07422, BLI11126 and BLI11122 Batteries.
MAGNETIC SPEED SENSOR 8 MM CONN M8 | Code: SSPRMG8M8
Magnetic speed sensor (to be used with magnets code MAG6X2).
SENSOR BRACKET | Code: SMB
Mounting bracket for 8mm diam. sensors.
FRONT AXLE MAGNET RING FOR KART | Code: REOKA
Front axle ring with magnets for kart speed signal (to be used with SSPRMG8M8 speed sensor).
REAR AXLE MAGNET RING FOR KART | Code: REOKP
Rear axle ring with magnets for kart speed signal (to be used with SSPRMG8M8 speed sensor).
ATHON FIXING KIT FOR MOTOCROSS-SUPERMOTO | Code: KITSUPATHMOT
Support Plate kit for Motocross and Supermoto hadlebar raiser for Stealth GPS 2-3-4, Corsaro and ATHON GPS.
ATHON VELCRO STRIP SUPPORT | Code: KITSUPATHSTP
Support kit with velcro strip system for Stealth 2-3-4, Corsaro and ATHON GPS.
POWER SUPPLY CABLE STEALTH GPS-3/4 AND ATHON XS | Code: ASPS100M8
Power supply cable for Stealth GPS-3/4 and Athon XS.
THERMOCOUPLE K AMPLIFIER CONN. M8 | Code: DAMTKM8
Thermocouple type K amplifier conn.M8 for thermocouple sensor code STKSP and STKM5E.
THERMOCOUPLE TYPE K THREAD M5 | Code: STKM5GS
Professional Exhaust Temperature Sensor with exposed junction, M5 male thread.