| ATHON |
 |
GPS Laptimer with intermediates - Digital Tachometer with LED bar and ultra bright. Shift Light - Backlit. GPS Speed,Engaged Gear, double Hour Meter,optional Water Temperature sensor input. Data download via Bluetooth, external vehicle 12Volts supply or optional 9Volts battery cases or optional batteries. DigiRace LE software downloadable from the website.
|
|
|
 |
GPS Laptimer with intermediates - Digital Tachometer with LED bar and ultra bright. Shift Light - Backlit. GPS Speed, double Hour Meter. Data download via Bluetooth,double power supply: 2 internal AA batteries and 12V external battery power supply.DigiRace-PRO 5.0 software supplied.
Available inputs for optional sensors: Water Temperature - Wheel Speed - 2 Suspensions - Throttle - Thermocouple type K - CAN BUS Line.
|
|
|
 |
GPS Laptimer with intermediates - Digital Tachometer with LED bar and ultra bright. Shift Light - Backlit. GPS Speed, Water Temperature, double Hour Meter.
Data download via Bluetooth,double power supply: 9Volts battery case supply.DigiRace-PRO software downloadable from the website. Available inputs for optional sensors: Axle Speed - Throttle - Thermocouple type K - Detonation + cylinder pressure - 2 Generic Analog - CAN BUS Line.
|
|
|
| SPECIFIC PRODUCTS |
Specific quick shift kit for Aprilia RSV4 Factory and RSV4 R.
Developed for installation with a specific plug and play wiring, connectable with the original installation without any change. The system is supplied with a module properly accomplished for interface with the original electronic central unit to avoid any operation failure or diagnostic error that may be found out in case of installation of universal products.
The kit is complete with the NRG dynamic revolutionary sensor for installation without any action on original levers, no matter whether you have a traditional shift or non-original footrests with reverse shift.
|
|
|
In addition to many electronic devices, Starlane is developing various parts for Aprilia RSV4 (which is also one of the company's lab-bikes), one of these parts is the triple clamp kit based on the design and structural philosophy of the units mounted on Max Biaggi's official bike.
The particular design is indeed the prerequisite of the flexibility feautres necessary to properly dampen lateral stresses at the maximum lean angles while keeping the maximum stiffness to the longitudinal stresses typical of the braking phase.
Replacing the original clamps with this kit will immediately improve the riding feeling as well as increase braking stability and steering precision in corners.
The kit has been totally designed with the most advanced CAD and FEM analysis engineering software programmes.
The lower plate has been developed to allow the eccentric stem to rotate quickly without disassembling the bike clamps, simply by loosening the two screws of the eccentric stem and the top plate bolt you can modify the offset from 30mm, originally, to 25mm.
The kit is also supplied with an additional neutral stem that can replace the eccentric one, thus setting the offset to 27.5mm.
Specifications:
- Totally carved from Ergal 7075
- Black anodizing
- Quick offset setting (offset 30-25mm) with eccentric stem
- Additional neutral stem included in the kit (offset 27.5mm)
- Fits original frame and fork
|
|
|
A GPS receiver that can activate satellite lap timer functions on all Ducati motorcycles of the latest generation to measure lap times with a 1/100-second resolution and a 10-millisecond accuracy on the average. The receiver has an actual 5Hz acquisition frequency and it is complete with an extremely accurate calculation algorithm Starlane has refined on its timing systems with GPS technologies in the past four years of experience.
The receiver is directly plug-and-play connected with the connector on the original motorcycle wiring. Just press a button at the time of crossing the finishing line for the first time to set up the end-of-lap reference, which will be automatically acquired whenever you cross the finish line in the subsequent laps.
Use the Ducati GPS receiver to display the chronometric data on the original motorcycle dashboard. These data are directly used by the Ducati original acquisition system by means of DDR USB.
|
|
|
A GPS receiver that can activate satellite lap timer functions on Aprilia RSV4 Factory and RSV4 R to measure lap times with a 1/100-second resolution and a 10-millisecond accuracy on the average. The receiver has an actual 5Hz acquisition frequency and it is complete with an extremely accurate calculation algorithm Starlane has refined on its timing systems with GPS technologies in the past four years of experience.
The receiver is directly plug-and-play connected with the connector on the original motorcycle wiring. Just press a button at the time of crossing the finishing line for the first time to set up the end-of-lap reference, which will be automatically acquired whenever you cross the finish line in the subsequent laps.
Use the Aprilia GPS receiver to display the chronometric data on the original motorcycle dashboard.
|
|
|
