With CORSARO-K you can compare online your performances and trajectories with other users on STARDROME
CORSARO is surely, by full right, the most innovative product in the field
for the philosophy by virtue of which it has been conceived and designed,
as well as for its technology enclosed in a compact design
executed with the greatest care.
CORSARO revolutionizes the concept of lap timer and data acquisition system and defines a new technological step in the world market.
Allows the immediate use thanks to the built-in library of hundreds of tracks with intermediates, between which the device automatically recognizes the current one.
Featuring S.E.P.L.A. (Starlane Enhanced Precision Laptiming Algorithm) function: a lap timing algorithm allowing very high lap timing precision.
LEAN ANGLE INDICATION
CORSARO supports the new features of Inertial Pack that can be activated in any moment from the website as option.
The Inertial Pack activates calculation and indication of:
LEAN ANGLE
LATERAL ACCELERATION in G
LONGITUDINAL ACCELERATION in G
DigiraceMMX analysis software will also shows the acceleration and lean angle charts.
The system calculates the lean angle relative to the axis (B) passing through the center
of gravity of the motorcycle + rider, considering also the rider position.
The lean angle is calculated by a high precision algorithm developed by Starlane
and does not require the installation of sensors on the vehicle.
Unlike other systems, it also allows correct angle alignment
and acceleration with the instantaneous position on the circuit.
You can see the lean angle degrees on the specific screen page
which indicates the current angle and the maximum degrees reached in the last right and left corners.
The screen also shows the maximum degrees reached in the session
differentiated between right and left corners.
CORSARO project has been cared to even the smallest detail, such as the seal, which not only performs the function of water protection but is also elastic part the SDGS (Starlane Gasket Dampening System), an anti-vibration system integrated in the body, allowing you protect the internal electronics mounted on the front, which thus remains completely suspended and, in addition to the elastic fixing of the instrument on the vehicle, undergoes in this way a strong damping of the vibrational stresses that might otherwise damage heavily any electronic device.
SDGs is an exclusive by Starlane, result of experience gained by addressing the various issues that came up from the most extreme product uses and whose installation is a focal point for the durability and reliability over time.
As every detail, also the power cord output of CORSARO has been designed to allow maximum installation compactness and flexibility. The special cable grip ensures watertight, maintaining total flexibility, and allows you to direct the cable in every direction following the various installation requirements.
This solution leads to an actually zero increase on the device thickness and is not comparable to the bulky rigid connectors usually used which stick out several centimeters from the back of the instrument creating great constraint in the installation.
The Micro USB socket allows you to easily recharge the internal battery in cases where the instrument is not powered by the vehicle battery.
WID-D MINIATURIZED WIRELESS MODULE (60mm X 44mm X 21mm) WITH INTERNAL RECHARGEABLE BATTERY ALLOWING UP TO 7 TRACK DAYS, EXTERNAL SUPPLY IS ALSO AVAILABLE
WID-D (code WD)
Available Inputs:
-Water Temperature
-Thermocouple K for exhaust temperature
-Engine RPM
-Analog 0-5V inlet (TPS)
-Wheel Speed
NEW SILICONE OPTIONAL BATTERY CASE FOR SECONDARY BATTERY
The new optional Battery Case
allows to add a secondary battery, type 18650,
which can be quickly and easily
replaced with a fully charged one.
The 18650 Battery supplied allows up to 5 track days before recharging.
See the Accessories section below for details on the battery kit.
IF YOU DON'T WANT TO USE YOUR COMPUTER OR PRESS BUTTONS ON THE TRACK, THE SAFD-2 FEATURE (Starlane Automatic Finish line Detection), WILL SPLIT AUTOMATICALLY THE TRACK AFTER THE FIRST 2 LAPS RUN, ALLOWING YOU TO SEE YOUR LAP TIMES AND INTERMEDIATES FROM THE VERY FIRST SESSION WITHOUT ANY ACTION ON THE LAP TIMER.
CORSARO allows the data download via Bluetooth.
Digirace-MMX software allows to analyse the data downloaded. Apps for Android and iOS Will be released soon.
Another feature making unique CORSARO is the possibility to be connected to the optional wireless WID (Wireless Input Device) expansion modules which allow the acquisition from external sensors (eg. throttle, suspensions, etc.) or from the CAN BUS line of the vehicle, creating in this way a professional, complete and unique in the world, data acquisition system being totally expandable in a wireless way.
Blue Ocean
Data Overlay rendered by Starlane DigiRace-MMX 2.0
CORSARO-K CHARACTERISTICS
1) DOUBLE CONSTELLATION GPS+GLONASS RECEIVER AND ANTENNA BUILT IN THE INSTRUMENT: the CORSARO shock-proof Nylon-glass charged body accommodates the new double constellation receiver which use in symbiosis the american GPS and the russian GLONASS satellite systems. This solution increases dramatically the precision due to the vero high number of satellite involved in instantaneous position, speed, trajectory and lap time determination.
2) YOU CAN SAY GOOD-BYE TO ALL UNPRACTICAL INFRARED TRANSMITTERS ARRANGED ON THE PIT WALL: the use of the GPS+GLONASS system intended to detect the lap time will make CORSARO completely autonomous, requiring no beacon transmitters, such as the infrared ones used by old-generation systems.
Everything is getting much simpler. It is no longer necessary to arrange the transmitter and to recharge the battery, which is extremely annoying and unpractical, with the risk of forgetting it on the wall or having it stolen.
3) MANAGEMENT OF THE FINISH LINE AND 3 INTERMEDIATES: by means of the track librari, available in the Device or in DigiRaceMNX software, you can set up the coordinates of 4 lap trigger lines (main finish line + 3 optional intermediates). Whenever you cross a finish line or an intermediate, CORSARO will indicate the relative split time and store its value. You can therefore quickly evaluate your own performance even if you are driving along a part of the track far from the main straight stretch, which would be expensive and unpractical if you used any other type of lap timer.
4) INDICATION OF THE ACHIEVABLE IDEAL TIME: by managing intermediates, CORSARO can calculate the time a driver can ideally achieve for every single session. This function is obtained by adding the best sectorial times. This will help you understand the lap time you might have achieved if there had been no traffic in a specific point of the track or if you had done a lap on top of your absolute performance.
5) DOUBLE FUNCTION "BEST LAP" LED: the "BEST LAP" LED will turn on if you have improved your previous lap and it will blink if the lap you have just done is the best of the session. This solution will supply the driver with all the information necessary for performance without any distraction.
If you have set up intermediate finish lines, the LED is also enabled whenever you cross an intermediate. This means that this instrument is extremely useful to realise without any distraction whether you are improving compared to the same intermediate time of the previous lap or whether you have just accomplished the best intermediate time of the session.
6) GPS SPEED MEASUREMENT: the advantage of using a GPS+GLONASS system is also that you can measure the vehicle speed with the highest degree of accuracy without having to install any sensor on the vehicle. No user setup is required and, above all, any measurement is always accurate, not altered by the inclination of the vehicle or tire deformation or spinning.
7) ENGINE SPEED INDICATOR* WITH SETTABLE SHIFT LIGHT: CORSARO is not only a chronometer and tachometer, but also an engine speed indicator. You can set the shifting engine speed by sentina the Shif Light ultrabright LEDs for which can also set the color. You can also display the speed. The engine speed can be measured by arranging the inductive cable in the proximity of an ignition coil or by connecting the signal wire to the original speed indicator.
8) ENGAGED GEAR INDICATOR* and WATER TEMPERATURE* WITH SETTABLE ALARM: CORSARO can also indicate the engaged gear by calculating the ratio between the engine revolutions and the wheel speed. It can also indicate the water temperature by means of an optional temperature sensor.
9) INPUT FOR EXHAUST OR OIL TEMPERATURE* WITH SETTABLE ALARM: CORSARO comes with a specific input for the optional Thermocouple type K to acquire the exhaust temperature, needed for the correct carburation on 2 stroke engines, or oil temperature for 4 stroke engines.
10) DOUBLE HOUR METER FOR THE PERFECT PERIODICAL MAINTENANCE OF THE VEHICLE: CORSARO has also got two hour meters that can be separately reset for the periodical maintenance of the vehicle. Hour meters are activated by the tacho signal and the GPS+GLONASS speed signal. This solution can operate the hour meters even if you do not wish to connect the tacho signal.
11) BLUETOOTH 4.0 DATA DOWNLOAD: CORSARO fits Bluetooth 4.0 features to set parameters and lap triggers and to download the acquired data that will be then analyzed directly into the software Digirace-MMX.
* See optional WID and RID modules to activate this feature.
12) SUPPLIED WITH THE DIGIRACEMMX SOFTWARE: the DigiRace-MMX software supplied with CORSARO can file, analyze and print the data acquired and graphically represent the paths you have driven across with the relative acceleration and deceleration points for a lap-by-lap comparison.
13) 999-LAP MEMORY WITH AUTOMATIC MANAGEMENT OF 99 TEST SESSIONS: CORSARO will automatically create a new session whenever you access the track. This means that you can analyse the times you have stored during the various sessions even at the end of the day without having to delete memory whenever you access the track. You can store the Date and Time of every single session as well as the total time, the intermediates, the maximum speed and the max. engine revolutions for every single lap.
14) CYCLICAL MEMORY MANAGEMENT: with CORSARO you will never face memory full issues because,in order to allow a continuous usage, it manages the available space by erasing automatically the oldest sessions when the memory is almost full.
15) STORAGE OF THE FINISH LINE COORDINATES OF THE TRACKS MOST USED: you can store the coordinates acquired for the finish line of the tracks you are training on most frequently. You can file up to 16 tracks and easily call the finish line of the current track without having to reset it every time.
16) MONOCHROMATIC BACKLIT LARGE-SIZE DISPLAY WITH TOUCH SCREEN: CORSARO comes with a display using translfletive technology, allowing full readability even under direct sunlight when backlight is off.
The sharp resistive Touch Screen allows easy acceso to device features also if wearing gloves. This solution has provided for the development of a icon-based user interface that allows to analyse all stored data and set up all wished functions in an unmatched user-friendly and immediate manner.
17) BUILT IN BATTERY AND EXTERNAL SUPPLY: equipped with internal high capacity Lithium battery can also be supplied by 12V vehicle battery. Moreover, CORSARO is complete with powerful energy saving and self power-off functions the user can set up to make the best use of battery performance. It is supplied with a specific extension with rings for battery connection and with a connector on one side of the instrument for rapid disconnection.
18) WATER-RESISTANT: CORSARO is water resistant and it can also be used in case of rain.
The analysis software DigiRace-MMX can be downloaded for free below...
Specifications:
Automatic lap timer with 1/100 second resolution
Double constellation 10Hz. GPS+GLONASS detection system with aeronautical algorithms
Built-in track library with hundreds of tracks with intermediates
Automatic finish line and intermediates positioning function without user intervention (SAFD-2)
Calculation of the achievable Ideal Time
Calculation and visualization of 3 Intermediates
Multilanguage menu (Italian, English, German, French, Spanish)
Digital engine speed indicator
GPS speed indication
Water Thermometer
Thermocouple K 1000°c thermometer*
Settable water and thermocouple temperature alarm*
Max. engine speed readout = 32000; max. speed = 165 Km/h or 102.5 Mph*
Settable Shift Light*
Settable number of pulses per RPM readout*
Double hour meter for engine maintenance
Bluetooth 4.0 Data download
Memory of 999 laps that can be managed in 99 sessions
Storage of max. RPM, Water Temp., Exhaust Temp. and Speed values for every single lap*
Speed indication in Km/h or Mph
Settable self power-off
Settable energy saving functions
Settable main screen
128x64 backlit Monochromatic graphical display with Touch Screen
Water resistant
Dimensions: width 95 mm - height 61 mm - depth 19.5 mm - weight 95 g
Supply: built in Lithium battery or external vehicle 12Volts battery
Universal installation
Optional Inertial Pack feature with Lateral and Longitudinal accelerations and Lean Angle indication that can be activated online
DigiRace-MMX software available for download
Intended use: Scooter - Kart - ATV
Content of the package for CORSARO-K (COD. CORSK):
N° 1 CORSARO device
N° 1 WID-D expansion module
N° 1 RPM induction cable
N° 1 Water temperature Sensor (CH2OM10)
N° 1 19mm. Aluminium sleeve (MAN19) for water temperature sensor
EXTERNAL BATTERY KIT FOR CORSARO 2ND SERIES - Code: BLICKS2
Kit including battery case (cod. BCCSWS2) + 18650 battery (cod. BLI34A18650) + battery charger (cod. BC181).
18650 TYPE BATTERY 3,7V - Code: BLI34A18650
18650 type battery 3,7V (to be charged by specific battery charger code BC181).
BATTERY CASE FOR BATTERY TYPE 18650 FOR CORSARO 2ND SERIES - Code: BCCSWS2
Battery case for 18650 type batteries (battery code BLI34A18650) for Corsaro 2nd series.
BATTERY CHARGER FOR 18650 BATTERY TYPE - Code: BC181
Battery charger for 18650 battery type (battery code BLI34A18650).
THERMOCOUPLE TYPE K M12 - Code: STKM12GS
Professional Exhaust Temperature Sensor with exposed joint, M12 female flange.
THERMOCOUPLE TYPE K THREAD M5 - Code: STKM5GS
Professional Exhaust Temperature Sensor with exposed joint, M5 male thread.
UNDER SPARK PLUG THERMOCOUPLE K SENSOR - Code: STKSP
Under spark plug thermocouple type K sensor.
WATER TEMPERATURE SENSOR M10X1 - Code: CH2OM10
Water temperature sensor M10X1 to be mounted on the optional water manifolds.
WATER MANIFOLD 19MM. DIAM. FOR SENSOR M10X1 - Code: MAN19
Water manifold 19mm. diam. to be used with water sensor code CH2OM10.
WATER MANIFOLD 26MM. DIAM. FOR SENSOR M10X1 - Code: MAN26
Water manifold 26mm. diam. to be used with water sensor code CH2OM10.
WATER MANIFOLD 10MM. DIAM. FOR SENSOR M10X1 - Code: MAN10
Water manifold 10mm. diam. to be used with water sensor code CH2OM10.
WID-C - Code: WC3A
Wireless Expansion Module for Corsaro with N° 3 generic analog inputs + CAN BUS line. Power Supply external: 12V.
INFRARED TYRE TEMPERATURE SENSOR CONN. M8 - Code: SSIRTP05M8
Infrared non-contact tyre temperature sensor M8.
ROTATIVE POT. SENSOR CONN. M8 - Code: SSRPOTM8
Throttle sensor - TPS.
MALE-FEMALE 50CM PATCH CONN. M8 - Code: PR50M8
Male-Female 50cm sensor patch cable.
MALE-FEMALE 100CM PATCH CONN. M8 - Code: PR100M8
Male-Female 100cm sensor patch cable.
MALE-FEMALE 150CM PATCH CONN. M8 - Code: PR150M8
Male-Female 150cm sensor patch cable.
ATHON FIXING KIT FOR MOTOCROSS-SUPERMOTO - Code: KITSUPATHMOT
Support Plate kit for Motocross and Supermoto hadlebar raiser for Stealth GPS 2-3-4, Corsaro and ATHON GPS.
7,4V 2,2AH LI-ION BATTERY - Code: BLI07422
7,4V 2,2Ah Lithium-Ion Battery to be charged only by the specific charger code: BCLIMV.
Compact solution to supply:
-Corsaro through the specific optional cable code PSCOR15M8.
-WID-C modules for Corsaro on vehicles without battery.
BATTERY CHARGER FOR LI-ION MULTIVOLTAGE - Code: BCLIMV
Battery charger for Li-Ion BLI07422, BLI11126 and BLI11122 Batteries.
Brake pressure 60 BAR sensor M10X1 thread conn. M8.
RID LAMBDA WIRELESS - Code: RID2LRT
Wireless module with Lambda Sond Bosch LSU4.9 and inputs for RPM and TPS for Corsaro.
MAGNETIC SPEED SENSOR 8 MM CONN M8 - Code: SSPRMG8M8
Magnetic speed sensor (to be used with magnets code MAG6X2).
FRONT AXLE MAGNET RING FOR KART - Code: REOKA
Front axle ring with magnets for kart speed signal (to be used with SSPRMG8M8 speed sensor).
REAR AXLE MAGNET RING FOR KART - Code: REOKP
Rear axle ring with magnets for kart speed signal (to be used with SSPRMG8M8 speed sensor).
MAGNET 6X2MM FOR SPEED SENSOR - Code: MAG6X2
Magnet 6mm diameter X 2mm thickness to be used with speed sensor SSPRMG8M8.
THERMOCOUPLE K AMPLIFIER CONN. M8 - Code: DAMTKM8
Thermocouple type K amplifier conn.M8 for thermocouple sensor code STKSP and STKM5E.
ATHON VELCRO STRIP SUPPORT - Code: KITSUPATHSTP
Support kit with velcro strip system for Stealth 2-3-4, Corsaro and ATHON GPS.
KIT SUPPORTO ELASTICO CORSARO - Code: KSCOR
Support kit for CORSARO.
WID-C 2S - Code: WC3A2S
Wireless Expansion Module for Corsaro with N° 3 generic analog inputs + 2 Speed inputs + CAN BUS line. Power Supply external: 12V.
CORSARO POWER SUPPLY CABLE - Code: PSCOR100
Power supply cable for all CORSARO models.
USB CHARGING CABLE FOR WID-A AND WID-D - Code: CUSBW
USB charging cable for WID-A and WID-D internal battery.
WID-D - Code: WD
Wireless Expansion Module for Corsaro.Available Inputs: Water Temperature -Thermocouple K for exhaust temperature -Engine RPM -Wheel Speed -Generic Analog available for TPS.Power Supply: Internal battery or external supply 5-15V.
BATTERY CASE FOR BATTERY TYPE 18650 FOR CORSARO 1ST SERIES - Code: BCCSWS1
Battery case for 18650 type batteries (battery code BLI34A18650) for Corsaro 1st series.
EXTERNAL BATTERY KIT FOR CORSARO 1ST SERIES - Code: BLICKS1
Kit including battery case (cod. BCCSWS1) + 18650 battery (cod. BLI34A18650) + battery charger (cod. BC181).
POWER SUPPLY FINAL CABLE FOR CORSARO 2ND SERIES - Code: PSCOR150FS2
Final branch of the power cable for Corsaro 2nd Series, length 150 cm.
PLUG FOR CORSARO 2ND SERIES - Code: CONCORS2
Wired plug for Corsaro 2nd series.
KIT POWER CABLE + PLUG FOR CORSARO 2ND SERIES - Code: PSCORS2K
Kit power cable (code PSCOR150FS2) + wired plug for Corsaro 2nd series (code CONCORS2).
Gallery:
Paolo de Conto, World Champion KZ with CORSARO.
Pedro Hiltbrand, World Champion KZ2 with CORSARO.
NEW DATA ANALYSIS SOFTWARE FOR ALL STARLANE SYSTEMS
Download DIGIRACE-MMX 2.01
Version: 2.01.00037
Release date: 02/02/2018 OS requirement: Windows 10, Windows 8, Windows 7,Windows XP, Vista, (Apple users can install Digirace-MMX if a Windows emulation package is running on the computer).
DIGIRACE-MMX SOFTWARE FOR THE ANALYSIS AND PRINTING OF ACQUIRED TEST SESSIONS
The DigiRace-MMX graphical interface is so user-friendly and intuitive that you can analyse acquired data rapidly and accurately.
Digirace-MMX integrates 2 different analisys levels allowing the rookie user to activate the simplyfied analysis and the most skilled one to switch to professional interface.
It can be used with all Starlane devices (ex. Stealth GPS-3, Athon XS, DaVinci, etc.) by selecting the model in the Device menu.
The main functions of DIGIRACE-MMX 2.01:
Download of the lap times and test sessions with the relative channels analysis.
Analysis and overlap of the paths detected by the GPS system.
Video and satellite view integration with data.
Analysis, printing and saving of downloaded data on files.
Recall and print of sessions you have saved before.
Choice between Simplyfied and Professional interface.
Data export in CSV format for Excel.
Lap export for the WWW.STARDROME.COM community.
NOW WITH THE INTEGRATION OF YOUR VIDEOS IN THE ANALYSIS SCREENS AND DATA OVERLAY VIDEO EXPORT.
SATELLITE VIEW INTEGRATED IN THE SOFTWARE WITH TRAJECTORY VISUALIZATION AND LAP TRIGGERS INSERTION DIRECTLY ON THE SATELLITE VIEWS.
ZOOMABLE TRAJECTORY COMPARISON OVERLAYED TO SATELLITE VIEW.
GPS TRACK
The window intended to analyse the GPS track represents the track with the paths run across by the driver. The RED and BLUE areas respectively indicate ACCELERATION and DECELERATION phases. The vehicle position is indicated by a yellow marker you can arrange at your own discretion by using the mouse or the , keys.
This website uses first-party and third-party cookies for technical purposes and to collect anonymous analytics data, respecting your privacy and according to law. By continuing to use our website, you agree to our use of such cookies.Read moreOK